PVC/EPDM coating systems
built to stick. designed to outperform.
built to stick. designed to outperform.
PVC and EPDM roofs demand systems that flex, grip, and last. Kool Coats delivers exactly that. Whether you need a high-solids silicone, a fast-curing, waterproof rubber-acrylic hybrid, or a flexibe and hail-tough rubber/urethane build, our single-ply stacks are built for performance. Every system starts with our single-ply primer for full adhesion over TPO, PVC, and EPDM and ends with a field-tested finish proven to protect.
pvc/epdm coating systems
built to stick. designed to perform.
built to stick. designed to perform.
PVC and EPDM roofs demand systems that flex, grip, and last. Kool Coats delivers exactly that. Whether you need a high-solids silicone, a fast-curing, waterproof rubber-acrylic hybrid, or a flexibe and hail-tough rubber/urethane build, our single-ply stacks are built for performance. Every system starts with our single-ply primer for full adhesion over TPO, PVC, and EPDM and ends with a field-tested finish proven to protect.
Why acrylic for pvc/epdm roofs?
When speed, flexibility, and cost efficiency are top priorities, our Acrylic stack delivers. This fabric-free system combines our waterproof rubber Kwikshot base with a tough acrylic topcoat to provide exceptional UV protection and crack resistance. Designed specifically for single-ply substrates like PVC and EPDM, it applies quickly and cures fast. It's perfect for time-sensitive projects. With high elongation (1200%) from the base and tensile strength from the acrylic finish, this stack is a reliable waterproofing solution that balances affordability with real-world durability. Total dry film builds range from 25 to 65 mils depending on the selected warranty tier
- High-elongation base (1200%) on every tier
- High tensile topcoat (TopShot Pro)
- Ideal for flat single-ply roofs
- Fabric-free install, fast cure times
bye bye fabric. hello rubber.
Most coating systems struggle to grip PVC and EPDM without layers of fabric or risky adhesion. Kwikshot™ changes that. This spray-grade rubber flexes with the membrane, bonds over a single-ply primer, and eliminates the need for fabric at seams and penetrations. That means faster installs, fewer failure points, and a cleaner, longer-lasting base for your acrylic or hybrid topcoats.
Compare 10-20 year builds and pick the right tier for your roof.
Why silicone for pvc/epdm roofs?
For building owners dealing with ponding water or harsh sun exposure, the KoolFlex Silicone stack is a go-to solution. This high-solids, low-VOC system delivers long-term performance with minimal maintenance. Featuring 279% elongation and excellent ponding resistance, KoolFlex is ideal for flat PVC or EPDM roofs that see standing water. The system goes down over a single-ply primer for maximum adhesion and can be installed in 10, 15, or 20-year configurations. With a total dry film thickness ranging from 28 to 50 mils depending on spec, KoolFlex provides a seamless, reflective membrane that’s easy to recoat and built to last.
- Superior ponding water resistance
- High reflectivity (SRI 109)
- Low VOC, spray or roll
- Recoat with silicone only
Compare 10-20 year builds and pick the right tier for your metal roof.
Why Rubber + urethane for Single-ply roofs?
For high-risk, high-exposure roofs, the Kwikshot™ + KC 460 Hybrid stack is Kool Coats’ premium restoration system. It starts with our elastomeric Kwikshot rubber base to absorb roof movement and prevent cracking. That's critical for aging EPDM and PVC membranes. On top, KC 460 delivers a urethane armor layer with 1100 psi tensile strength and Class 4 hail resistance. This system is chemical resistant, UV-stable, and built to take a beating. Available in 10-, 15-, and 20-year builds, it ranges from 45 to 95 mils in total DFT and is fully recoat-flexible for long-term asset protection. It’s the toughest stack we offer for single-ply restoration.
- Rubber base absorbs movement and prevents cracking
- 1100 psi urethane top = Class 4 hail defense
- Non-yellowing, UV-stable finish
- Ponding-rated, chemical resistant, and recoat-flexible
Compare 10-20 year builds and pick the right tier for your roof.
Why acrylic for single-ply roofs?
When speed, flexibility, and cost efficiency are top priorities, our Acrylic stack delivers. This fabric-free system combines our waterproof rubber Kwikshot base with a tough acrylic topcoat to provide exceptional UV protection and crack resistance. Designed specifically for single-ply substrates like PVC and EPDM, it applies quickly and cures fast. It's perfect for time-sensitive projects. With high elongation (1200%) from the base and tensile strength from the acrylic finish, this stack is a reliable waterproofing solution that balances affordability with real-world durability. Total dry film builds range from 25 to 65 mils depending on the selected warranty tier
- High-elongation base (1200%) on every tier
- High tensile topcoat (TopShot Pro)
- Ideal for flat single-ply roofs
- Fabric-free install, fast cure times
bye bye fabric. hello rubber.
No system handles TPO like Kwikshot™. This spray-applied rubber base seals details in one pass, flexes under stress, and replaces the mess of embedded fabric. It’s the fastest, smartest way to build a fully waterproof acrylic base. Faster installs. Stronger seams. No fabric.
Compare 10-20 year builds and pick the right tier for your metal roof.
Why silicone for tpo roofs?
For building owners dealing with ponding water or harsh sun exposure, the KoolFlex Silicone stack is a go-to solution. This high-solids, low-VOC system delivers long-term performance with minimal maintenance. Featuring 279% elongation and excellent ponding resistance, KoolFlex is ideal for flat PVC or EPDM roofs that see standing water. The system goes down over a single-ply primer for maximum adhesion and can be installed in 10, 15, or 20-year configurations. With a total dry film thickness ranging from 28 to 50 mils depending on spec, KoolFlex provides a seamless, reflective membrane that’s easy to recoat and built to last.
- Superior ponding water resistance
- High reflectivity (SRI 109)
- Low VOC, spray or roll
- Recoat with silicone only
Compare 10-20 year builds and pick the right tier for your metal roof.
Why Rubber + Urethane for single-ply roofs?
For high-risk, high-exposure roofs, the Kwikshot™ + KC 460 Hybrid stack is Kool Coats’ premium restoration system. It starts with our elastomeric Kwikshot rubber base to absorb roof movement and prevent cracking. That's critical for aging EPDM and PVC membranes. On top, KC 460 delivers a urethane armor layer with 1100 psi tensile strength and Class 4 hail resistance. This system is chemical resistant, UV-stable, and built to take a beating. Available in 10-, 15-, and 20-year builds, it ranges from 45 to 95 mils in total DFT and is fully recoat-flexible for long-term asset protection. It’s the toughest stack we offer for single-ply restoration.
- Rubber base absorbs movement and prevents cracking
- 1100 psi urethane top = Class 4 hail defense
- Non-yellowing, UV-stable finish
- Ponding-rated, chemical resistant, and recoat-flexible
Compare 10-20 year builds and pick the right tier for your metal roof.
EXPLORE OUR SYSTEMS BY SUBSTRATE
